Press Release

Battery Fires: Recycling Associations Call for Manufacturer Fund

Photo: Saubermacher

 

A study commissioned by CMA, ASA, BDE, bvse, and VKU shows growing fire risks in the circular economy. It is based, among other things, on a survey of 181 facilities for the period 2021 to 2025.

Berlin, Düsseldorf, Brussels, 14.10.2026 – In Germany, fires occur almost daily in collection vehicles, recycling centres, and sorting and treatment facilities. Where the cause can be clearly identified, lithium-ion batteries are by far the most frequent trigger. This is shown by the study ‘Fire Incidents in the Waste Management Industry’, commissioned by the Circular Metal Association (CMA) together with ASA, BDE, bvse, and VKU. It is based on a nationwide association survey of 181 facilities for the years 2021 to 2025, supplemented by the current state of research and international studies. According to the study, the proportion of fire incidents attributed to lithium-ion batteries rose from around 63 to 73 per cent between 2021 and 2025.

Fires Almost Tripled

Within five years, fire incidents in the surveyed facilities have almost tripled. More than one in two facilities was recently affected by fires or dangerous hotspot events. Facilities for light packaging as well as residual and commercial waste are particularly affected.

The reason lies in the waste stream. Between 2020 and 2023 alone, more than 130,000 tonnes of batteries were not collected via the intended collection systems. Small devices, short-lived consumer products, and permanently installed batteries often end up unnoticed in residual waste, packaging waste, or other material streams. This is often because consumers do not recognise them as waste electrical and electronic equipment.

The Fire Starts Before the Facility

In almost half of the surveyed facilities, the predominant origin of fires in 2025 was before the first processing unit, primarily in delivery, storage, and bunkers, as well as in vehicles. Companies have invested significantly in early fire detection, extinguishing technology, procedures, and training, thus managing most incidents. However, they cannot prevent the fires: damaged batteries can ignite with a delay and often without recognisable warning. In collection vehicles, plant-specific protective measures are completely ineffective.

Hundreds of Millions of Euros in Damage, Insurers Withdrawing

Fires with lithium-ion batteries as the probable cause account for estimated economic damages of 200 to 320 million Euros in the 181 facilities for 2021 to 2025. This represents approximately 80 percent of the total recorded damages of 250 to almost 400 million Euros. This includes not only property damage but also costs due to business interruptions, fire brigade deployments, and consequential effects along the value chain. Nationwide, the damages are likely to be higher, as the survey only covers a portion of the facilities, and disposal bottlenecks, for example, were not quantified.

At the same time, the situation in the insurance market is worsening. Many businesses report rising premiums, higher deductibles, and stricter conditions. In some cases, insurers are already withdrawing from the sector. For some facilities, after cancellations, the question arises whether they can be insured at all. Others must clarify whether they can still economically bear the required premiums and deductibles.

“Our member companies in waste battery, end-of-life vehicle, waste electrical and electronic equipment, non-ferrous metal, and steel scrap recycling recover valuable metals and return them to the economic cycle as secondary raw materials. In doing so, they close raw material loops and make an indispensable contribution to Germany’s and Europe’s raw material resilience,” says Guido Lipinski, Managing Director of CMA. “At the same time, our companies and their employees are exposed to an unacceptable risk due to incorrectly disposed lithium-ion batteries – in terms of occupational safety, fire and plant protection, and even the economic existence of the businesses. So far, recycling companies have largely been left alone with these risks and their consequences. This must change.”

Responsibility Where Products Are Placed on the Market

The study concludes that without effective countermeasures, a gradual worsening of the situation is to be expected. The waste management and recycling industry can limit risks. However, it does not decide which products come onto the market, how they are designed, and how their return is organised. Therefore, better citizen-friendly return systems, comprehensive consumer-friendly battery collection, continuous education, and product requirements that make batteries easier to remove are necessary.

Even with optimal collection, some batteries will continue to be disposed of incorrectly. Therefore, the study considers a manufacturer-financed prevention and compensation fund to be appropriate. It could finance education and collection, support investments in fire protection, cushion damages where insurance coverage is lacking, and stabilise insurability. The volume, design, and legal admissibility would need to be clarified before implementation.

“Anyone who wants to strengthen raw material resilience and take ‘Close the Loop’ seriously must also protect those who recover valuable metals and keep them in the cycle,” says Lipinski. “We therefore urgently need effective measures that minimise risks for our companies, and a binding responsibility for all actors along the product and value chain. Because resilient raw material cycles require safe and economically viable recycling structures.”

The Associations’ Demands

  • Consistently apply producer responsibility: involve manufacturers in the consequential costs of battery-related fires.
  • Introduce prevention and compensation funds: secure manufacturer-funded education, collection, fire protection, and damage compensation.
  • Reduce incorrectly disposed waste: significantly strengthen consumer information and return systems.
  • Support fire protection: recognise and promote the industry’s investments in safety and prevention.
  • Improve framework conditions: uniform fire statistics, better data availability, further development of producer responsibility.

Important decisions are pending at national and European level, such as on a possible deposit system for lithium-ion batteries and the further development of producer responsibility.

__________________________

About the Circular Metal Association (CMA)

The Circular Metal Association is Europe’s leading industry association for steel and metal recycling. Approximately 900 member companies cover the entire spectrum: from collection and processing to trade and supply to the metal and steel processing industry. Around 90 per cent of the industry companies active on the market are organised within the CMA. Its members supply the recycled raw materials that European industry works with – and are thus an indispensable part of the European raw materials industry. The CMA was formed from the merger of the Federal Association of German Steel Recycling and Waste Management Companies (BDSV) and the Association of German Metal Traders (VDM).

We create certainty.

Press Contact

Portrait of Bernd Meyer

Bernd Meyer

International Association & Industry Engagement

Share article

Further press releases

CMA INDEX*
STEEL SCRAP PRICES IN GERMANY IN €/t (10/2026)**

Grade 1

253.6 €/t

Grade 2

293.7 €/t

Grade 3

287.5 €/t

Grade 4

301.1 €/t

Grade 5

246.6 €/t

*Previously BDSV Average Prices
**Reports from member companies of the BDSV (Federal Association of German Steel Recycling and Waste Management Companies) on prices and quantities to a neutral reporting agency (IW Consult). IW Consult acts exclusively on behalf of the BDSV, is solely responsible for technical implementation, and assumes no liability or warranty. The reporting period runs from the 1st to the 20th of the current month. The prices to be reported are exclusively ex-station prices (warehouse sales prices – loaded free on wagon, free on lorry or free on ship from site). Prices for new scrap grades 2 and 8 are recorded together.

For non-members, the BDSV average prices are published from the 10th day of the following month. Find out about your benefits of membership here.

Please refer to the Steel Scrap Grade List for the specifications of the individual steel scrap grades.

Switch to German