Defined steel raw material qualities in separate material containers.

HOME RAW MATERIALS & CIRCULARITY GRADES & QUALITIES

STEEL SCRAP:
GRADES AND QUALITY

Technical overview for trade, processing, and industrial use.

Steel scrap is a key raw material in the circular economy. Clearly specified grades and quality requirements enable efficient processing and high-quality recycling in the steel industry.

ORIGIN. COMPOSITION. QUALITY.

CLEAR CLASSIFICATION FOR QUALITY AND USE.

Steel scrap varies in origin, composition, dimensions and quality. These characteristics determine how it is processed and used in industry.

Old Scrap

OLD SCRAP

Scrap from end-of-life products, structures and equipment. Sorting and processing produce material suitable for industrial use.

Sorted steel offcuts from industrial manufacturing.

NEW SCRAP

Production scrap generated during steel processing, including sheet, stampings, offcuts and swarf.

THE BASIS OF PROCESSING

FEEDSTOCK FOR PROCESSING

Feedstock varies in origin, form, composition and quality. Sorting and processing produce material that meets specified quality requirements.

Shear Feedstock

SHEAR FEEDSTOCK

Mixed scrap is sorted, sheared and cleaned to produce grades suitable for direct use in steel production.

Shredder Feedstock

SHREDDER FEEDSTOCK

Shredder feedstock is coarsely sorted mixed scrap, prepared for shredding and material separation in a shredder plant.

Rails

RAILS

Rail scrap consists of decommissioned or damaged steel rails from railway or industrial sectors, which are returned to the recycling loop as high-quality scrap.

Tinned Material

TIN-COATED SCRAP

Tin-coated scrap consists of metal scrap with a tin coating and must be handled as a separate fraction during recycling.

Production Waste

PRODUCTION SCRAP

Steel production scrap includes sheet, swarf, stampings, offcuts and trim generated during manufacturing and segregated by grade.

TECHNICAL GRADE OVERVIEW

STEEL SCRAP GRADES

Steel scrap grades are classified by material type, thickness, dimensions and other quality characteristics. The technical designations and requirements are listed for each grade.

Sorted thick old steel pieces with visible shear edges.

GRADE 1

Old steel scrap, min. 4 mm thickness, maximum dimensions: 1.50 x 0.50 x 0.50 m

Flat steel sheet remnants and punched metal plates in a recycling hall.

GRADE 2

New steel scrap, min. 3 mm thickness, maximum dimensions: 1.50 x 0.50 x 0.50 m

Heavy rusty steel beams and pipe pieces, sorted in a recycling hall.

GRADE 3

Heavy old steel scrap, min. 6 mm thickness, maximum dimensions: 1.50 x 0.50 x 0.50 m

Shredded steel scrap in a sorting container.

GRADE 4

Shredded steel scrap, free from steel scrap from waste incineration or separation, bulk density (dry): min. 1.1 t/m³ Metallic iron content: min. 92%

Small shredded tinplate fragments in a recycling plant.

GRADE 47

Shredded or similarly processed steel scrap from waste separation (separate recycling of cans), bulk density (dry): min. 0.9 t/m³, particle size: upper limit 50-70 mm, max. 5 % by weight < 5 mm, Metallic iron content: min. 92%, moisture: separate agreement

Spiral steel swarf from metalworking.

GRADE 5

Steel turnings, free from cast iron turnings and free-cutting steel turnings

Thin steel sheets pressed into a bale.

GRADE 6

Bales of new light steel sheet scrap

Crushed tinplate cans in a recycling plant.

GRADE 71

Tinplate can scrap (pre-compacted), min. 93% tinplate packaging; other suitable Fe components for the same recycling are credited to the 93% quota up to 5%, no mixing with steel scrap from waste incineration, largely free from admixtures of other packaging with the exception of packaging made of thin steel sheet. Tinplate packaging also includes its (proper) components. Bulk density on wagon or lorry: min. 0.25 t/m³, bundles (bales) must not exceed a max. edge dimension of 0.60 x 0.60 x 1.50 m

Compacted tinplate remnants with irregular, crumpled edges.

GRADE 75

Tin-plated can scrap (baled), prepared from used tin-plated packaging processed by shredding or similar methods. Bulk density: min. 1.6 t/m³, edge dimensions: max. 0.50 m x 0.50 m x 1.50 m. Impurity content: max. 2.5% determined by ignition test.

Tightly pressed bale of used tinplate cans.

GRADE 76

Tinplate can scrap (baled), min. 93% tinplate packaging; other suitable Fe components for the same recycling are credited to the 93% quota up to 5%, no mixing with steel scrap from waste incineration, largely free from admixtures of other packaging with the exception of packaging made of thin steel sheet. Tinplate packaging also includes its (proper) components. Bale density: min. 1.3 t/m³, bulk density on wagon or lorry: min. 0.4 t/m³, bales must not exceed an edge dimension of 0.60 x 0.60 x 1.50 m

Dark, oxidised metal remnants from waste incineration.

GRADE 79

Steel scrap from waste incineration, free from electrical assemblies and copper-bearing material, bulk density: min. 0.4 t/m³, particle size: max. 1500 mm max. 5 % by weight < 5 mm Metallic iron content: min. 85%

Stacked thin steel sheet remnants with round punch-outs.

GRADE 8

New steel scrap, under 3 mm thickness, maximum dimensions: 1.50 x 0.50 x 0.50 m

GERMAN GRADE LIST

CAST IRON SCRAP AND FOUNDRY STEEL SCRAP

The supplementary grade list is divided into cast iron scrap and foundry steel scrap from old and new scrap.

CAST IRON SCRAP

Grade 1a

Broken ingot moulds, ingot mould bases and casting plates, hand-sized

Grade 2a

Machine cast iron scrap, hand-sized, especially thick-walled pieces from: machine tools, other machinery (including agricultural) and engines, generally not under 10 mm thick, feeder heads, wagon axle boxes (free from oil, grease or other adhesions) and rail chairs, all free from steel and burnt cast iron, wrought iron and enamel

Grade 3a

Commercial cast iron scrap, hand-sized, especially clean, thick-walled pipe cast iron scrap, building cast iron scrap, thin-walled scrap from agricultural machinery, sewerage parts, paving slabs and unburnt furnace parts, all free from steel and burnt cast iron, wrought iron and enamel

Grade 44

Cast iron swarf

FOUNDRY STEEL SCRAP – OLD SCRAP

I/1

Old scrap, min. 6 mm, diagonal length a) max. 40 cm, b) max. 150 cm

III/8

Railway superstructure scrap, such as hook plates, screws, nails, base plates, rib plates, clamping plates, railway switch and frog pieces, sleeper pieces, grooved rail pieces, field railway and mine rail pieces, mine support profiles (arch girders), chain scrap

IV/9

Railway rail pieces

FOUNDRY STEEL SCRAP – NEW SCRAP

I/1.1

Steel turnings

II/1

New scrap, min. 3 mm, unless covered under II/2-7

II/2

Forging scrap (dies, flash scrap), heavy skulls up to approx. 30 cm, flanges from 5 mm, drawing ends, billet ends

II/3

Heavy plate offcuts from 5 mm, section iron offcuts, bar iron offcuts

II/4

Chopped scrap, wide strip edge trim scrap, TZ punching waste, light trimming scrap

II/5

Deep-drawing sheet packages 40 x 40 x 60 cm

II/6

Deep-drawing sheet packages 30 x 30 x 30 cm

II/7

Small scrap – including rivets, pins, bolts, screws, nuts, etc.

RAW MATERIALS & CIRCULARITY

FROM QUALITY TO INDUSTRIAL USE.

Learn more about processing, metal cycles, and market information.

CMA INDEX*
STEEL SCRAP PRICES IN GERMANY IN €/t (10/2026)**

Grade 1

253.6 €/t

Grade 2

293.7 €/t

Grade 3

287.5 €/t

Grade 4

301.1 €/t

Grade 5

246.6 €/t

*Previously BDSV Average Prices
**Reports from member companies of the BDSV (Federal Association of German Steel Recycling and Waste Management Companies) on prices and quantities to a neutral reporting agency (IW Consult). IW Consult acts exclusively on behalf of the BDSV, is solely responsible for technical implementation, and assumes no liability or warranty. The reporting period runs from the 1st to the 20th of the current month. The prices to be reported are exclusively ex-station prices (warehouse sales prices – loaded free on wagon, free on lorry or free on ship from site). Prices for new scrap grades 2 and 8 are recorded together.

For non-members, the BDSV average prices are published from the 10th day of the following month. Find out about your benefits of membership here.

Please refer to the Steel Scrap Grade List for the specifications of the individual steel scrap grades.

Switch to German